The VIO-D combines a motion radar sensor for opening the door with a double failsafe active infrared curtain for the protection of users, in accordance with the EN 16005 standard. Opening and closing the door is controlled by a unidirectional radar and safety is ensured by the two 24-infrared spot failsafe curtains.
Energy-saving
The unidirectionality of the VIO-DT1 enables energy savings to be made within the building. The door closes sooner and reduces thermal losses.
Easy configuration
Simple adjustments using DIP-Switches and potentiometer.
Flexible detection area
Adjustment of the infrared curtain width with the prisms (curtains of 12 or 24 spots depending on the prism used)
Easy adjustment
Simple adjustments using DIP-Switches and easy positioning and localising of the curtains thanks to mechanical adjustments and the spotfinder.
BEA VIO DT
| Supply voltage: | 12 V - 30 V DC -5%/+10% (to be operated from SELV compatible power supplies only) | |
| Power consumption: | < 2.2 W | |
| Mounting height: | 1.8 m to 3 m | |
| Sensitivity of the test input: | < 1 V : Log. L; > 10 V: Log. H (max. 30 V) | |
| Temperature range: | -25 °C to +55 °C | |
| Degree of protection: | IP54 | |
| Noise: | < 70 dB | |
| Expected lifetime: | 20 years | |
| Norm conformity: | EN 12978:2009; EN IEC 62061:2005 SIL2, EN 61496-1:2012 ESPE Type 2; EN ISO 13849-1:2008; Pl «c» CAT.2 (under the condition that the door control system monitors the sensor at least once per door cycle); EN 16005:2012 | |
| Detection mode: | Motion Min. detection speed: 5 cm/s | Presence Typical response time: <256 ms |
| Technology: | Microwave doppler radar Transmitter frequency: 24.150 GHz Transmitter radiated power: < 20 dBm EIRP Transmitter power density: < 5 mW/cm2 | Active infrared with background analysis Spot diameter: 0.1 m (typ) Number of spots: 24 Number of curtains: 2 |
| Angle: | From 15 ° to 50 ° vertical (adjustable) | From -4 ° to +4 ° (adjustable) |
| Output: | Solid-state-relay (free of potential, free of polarity) Max. contact current: 100 mA Max. contact voltage: 42 V AC/DC | Solid-state-relay (free of potential, free of polarity) Max. contact current: 100 mA Max. contact voltage: 42 V AC/DC |
| Hold time output signal: | 0.5 s | 0.3 s to 1 s (not adjustable) |
| Response time on test request: | This product conforms to all applicable European Union legislation. Please refer to the Declaration of Conformity for further information. | |
VIO DT1
unidirectional monitored dual sensor
VIO DT2
bidirectional monitored dual sensor
IXIO/VIO/4SAFE INTERFACE
Interface for the IXIO/VIO/4SAFE
IXIO/VIO RA
Rain accessory for the IXIO & VIO range
IXIO-D/VIO BA
Bracket Accessory for the IXIO-D & VIO range
VIO CA
Ceiling accessory for the VIO
Curved door accessory for the IXIO-D & VIO-D range
VIO PRISMS
Infrared prisms for the VIO range
SPOTFINDER
Tool for visualising the exact position of infrared curtains.